mains

Only problem with this is that now mains wiring is going to be part of the obsolescence cycle.

Academia is one of the mains reason for keeping this free and separate from our main product.

You still have an area where both the mains and the subs are producing that sound.

In a small domestic system where the mains are only a few feet from the sub, you don't notice it.

The real market potential for batteries is not in those parts of the West where there is cheap, reliable mains.

The hybrid setups I tested were usually in the ballpark of 46-48# poly mains with 50-52# gut crosses.

And if you aren't AC mains connected and don't have any voltages above X VDC then UL low voltage testing is easy.

The trouble with doing that with a large enough system, is that you now have phase issues between the subwoofers, and the mains.

Say your subwoofer is set to only reproduce sounds up to 100hz, and your mains are set to only produce sounds above 100hz...

It's used for washing both people and things; Swimming pools are normally heated, even just a little, above the cold water mains temperature.

You could improve the S/N ratio by: - separating the wiring for the two systems as much as possible, and fitting a mains noise filter to keep the loop signal out of the mains wiring.

Later bugs diverted some of the AC mains power from the typewriter.

I got caught up in the "Lil" naming craze, where everyone made minified alt versions of their mains and called them "LilSomething".