ferrules

And much of the soldering is done with solder ferrules (aka solder zaps) that sit over a wire and release solder when exposed to heat.

The mains connection should be clamped in the enclosure and either spade connections or screw terminals or ferrules.

It's really my fault that my glasses have been scratched by the ferrules on the ends of umbrellas.

Using the tiniest of ferrules seems to be a conscious design choice, though incorrect material and manufacture are commonly seen as well.

I recently fixed 3 major leaks with around R200 in parts (pieces of pipe, ferrules, etc).

Comparing the photos on page 22 (Dali) and 25 (Cezanne), you can clearly see the blue ferrules in the correctly wired panel on the Cezanne.

Love your use of wire duct to keep things organized, and small attention to detail like ferrules on each wire going into the terminal blocks.

Were you aware that they are aluminum, or called ferrules?

I use ferrules at the end of jumper wires to make a stronger connection when I put the wire into a spring terminal.

Spring terminals + ferrules are still the way.

If I am using screw terminals, wires are terminated with ferrules.

> Ferrules — the metal bands that cinch around the bases of erasers — are loaded onto a conveyor and sent to a tipping machine.

I'm pretty sure the correct translation of Aderendhülse is "insulated wire ferrules".

After battling Python dependencies, slow processing, and deployment headaches with tools like unstructured, I finally snapped—and built Ferrules, a blazing-fast document parser in Rust.