Solder used in a sentence

Solder in a sentence as a noun

If you join a gang as a foot-solder, you do it to get to the top.

BGA balls are made of solder, and they'll cold-flow under pressure.

This is called a "cold joint".It's also essential to use flux when soldering.

When the metal is hot, solder remains melted, flows onto the metal and bonds to it.

The government won't forbid the sale of transistors and solder.

A toddler also can't operate a letterpress, solder, or fly a plane.

Do you think the tiny solder joints at the power coupling are really designed to take 500 watts of power?

Most solders used in electronic hand-soldering have a rosin flux core in the middle.

That's why solder wire and stick welding electrodes have flux cores or coatings, why MIG/TIG welding uses a shielding gas, and so on.

The rosin melts first onto the metal you're heating, preventing the heat from forming an oxide layer so the solder can bond to the metal.

Solder in a sentence as a verb

None of them are put through strict process control during manufacturing to ensure that such mundane things as cracked or "cold" solder joints don't creep into a batch.

In satellite design, where repair is, of course, impossible; the rule is to never use a solder joint as a mechanical connection.

So sometime later, as a result of thermal expansion or mechanical flexing, the solder joint becomes unstuck.

Listen to his Techcrunch interview where he talks about having to solder integrated circuits onto boards to build the first Bloomberg terminals.

I prefer to cut the leads before I solder them - this way there's no risk of unsettling the contact while you cut the soldered lead, so this gives you nice solid reliable contacts.

In fact, when soldering you should heat only the metal parts first and not the solder directly, and then apply the solder to the metal parts where the soldering iron touches them.

The production guys were always returning prototype devices due to mechanical problems on the boards as well and they were coming back with socketed LGAs and soldered PGAs.

Is the idea that there's a loose chip, and you're reflowing the solder to re-attach it?Relatedly, one of my friends successfully revived a bricked playstation by heating up the motherboard with a heat gun.

Working at the right temperature is crucial; too hot and you burn components and oxidize pads before they get soldered; too low and again you may burn components because you're fiddling with the iron too long; or you make weak unreliable contacts.

There was a big problem a while back with Nvidia integrated graphics failing pretty often that apparently had to do with bad potting material material in the chip modules that didn't have the same thermal expansion properties as the solder that Nvidia had switched to.

Proper Noun Examples for Solder

Soldering requires skill, knowledge of the correct solder to use and even the correct tip and temperature settings for particular solders.